Line Fittings
Transmission line fittings produce resonance. The power consumed by the hammer movement acts to suppress the amplitude and vibration of the conductor
Talk With Our TeamConstruction
The fuse elements used in most distribution cutouts are tin or silver alloy wires that melt when subjected to high enough current. Ampere ratings of fuse elements vary from 1 ampere to 200 amperes.
Standards
Up until the mid-1990s each manufacturer used their own dimensional standards for cutout design; by the late 1990s most cutouts were of an "interchangeable design". This design allows for the interchangeable use of cutout bodies and fuse holders manufactured by different vendors.
Products FAQ
Used on overhead transmission lines and taps to protect distribution transformers from current surges and overloads,An overcurrent caused by a fault in the transformer or user circuit can cause the fuse to melt and the switch mechanism to visibly open,Disconnect the transformer from the line. The device can also be opened manually by a utility line worker standing on the ground and using a long insulating rod called a “ground rod”.
Used on overhead transmission lines and taps to protect distribution transformers from current surges and overloads,An overcurrent caused by a fault in the transformer or user circuit can cause the fuse to melt and the switch mechanism to visibly open,Disconnect the transformer from the line. The device can also be opened manually by a utility line worker standing on the ground and using a long insulating rod called a “ground rod”.
Resources
For more Other high-voltage products.
please contact a sales representative at sale16@gotoelectrical.com or submit a Quote Request.
Stay connected with Industry Insights
Stay informed with news and insights that matter to you and get quarterly updates sent direct to your inbox.